Best Longboard Bearings For 2018

Whether you cruise on the seaside or shred downhills, bad bearings should never kill your fun! A longboard that is continuously breaking for no reason will make your ride less enjoyable! To help you figure out which are the best longboard bearings for you, we made a selection of the 10 best bearings, allowing you to check what corresponds best to your type of ride.

Also, a brief buying guide will help you get the perfect setup for your next sessions.

Here is our selection of the 10 best bearings:

Product ImageNamePriceRating
Bones Reds Bearings$$9.5/10

CHECK PRICES ON AMAZON
Bones Super Reds Bearings$$$9.1/10

CHECK PRICES ON AMAZON
Bones Super Swiss 6 Bearings$$$9.3/10

CHECK PRICES ON AMAZON
NEAL Blackout Ceramic Bearings$$9.0/10

CHECK PRICES ON AMAZON
SupaFly Alpha Bearings$8.9/10

CHECK PRICES ON AMAZON
SCSK8 ABEC 9 Red Silver Bearings $8.5/10

CHECK PRICES ON AMAZON
Yellow Jacket Premium Bearings$8.9/10

CHECK PRICES ON AMAZON
Oldboy Premium Ceramic Bearings$$9.0/10

CHECK PRICES ON AMAZON
Fireball Dragon Precision Bearings$9.0/10

CHECK PRICES ON AMAZON
Zealous Bearings$9.1/10

CHECK PRICES ON AMAZON

Buying Guide


Before reading this buying guide, we must clarify a common misbelief. Good longboard bearings are not necessarily fast bearings, which by the way, won’t make you a faster rider.

Good bearings are just bearings that allow your wheels to spin without any unnecessary frictions, and providing a smooth ride. You need 8 of them for your longboard, 2 for each wheel.

Now, take a look at our buying guide if you want to know more about what makes the best longboard bearings.

Sizes

For once, you won’t have to deal with an extended size chart.

Longboard bearings all have the same size. In fact, you can insert longboard bearings in skateboard wheels or vice versa. Longboards and skateboards wheels are designed to receive a unique dimension of bearing.

Components

Best longboard bearings components

The outer ring: The outer ring, as its name describes, is the exterior circle of your bearings.

The inner ring: The shorter ring is the inner metal circle of your bearings

The bearing balls: The bearing balls are little metal balls that are located between the outer ring and the shorter ring.

The cage: The cage, located between the outer ring and the shorter ring, holds the bearing balls and prevent them from touching each other.

The shield: The shield is the rubber disc that seals the bearing and prevents dirt and dust from getting in.

That’s all, bearings aren’t that complicated at the end, right?

Related components

These are parts that directly interact with the bearings; they can substantially increase the durability of your bearings.

Best longboard bearings related components

Spacers: Spacers are optional, but we recommend them, you need 4 of them. They are located in between the bearing (see picture above). Spacers are designed to keep two bearings from the same wheel nicely parallel and at the same distance from each other. If you bearings are maintained parallel, they will turn smoothly for longer.

Some bearings feature integrated spacers.

Speed rings: There are 8 oh them, they’re located between the bearings and the hanger (see picture above). They reduce friction by preventing the bearing from touching the hanger and the bolt, increasing bearings’ durability.

ABEC Rating

ABEC ratings are often used when referring to longboard and skateboard bearings, but are they that useful?

First of all, how does it work? It’s simple, ABEC refer to the manufacturing quality of a bearing. The higher the rating, the fewer chances it will fail on you, nothing more! Many people think that ABEC ratings refer to the speed of the bearing, that’s not true!

What does it mean? This only means bearings with high ABEC ratings will last longer. Their components are made more precisely, preventing any unnecessary frictions. Bearing with low ABEC ratings will still correctly work, but they will deteriorate faster.

However, we won’t recommend considering ABEC ratings when choosing your new bearings, even though many skaters still do.

ABEC ratings were mostly made for industrial bearings, which are designed to turn much faster. The quality of the materials and the level of industrial performance machines require, determined the quality standard in this industry.

But longboard bearings don’t have the same quality standards. Quality longboard bearings don’t require the same resistance, speed or weight. When you are cruising on your longboard, the forces applied to your bearings are much different!

If you shouldn’t consider ABEC ratings, then how to know which bearings to buy?

Here is a tip, look at the different bearings brands and go for the one that focuses only on bearings, it will have more knowledge and experience.

Materials

Longboard and skateboard bearings come in 3 different materials: steel, stainless steel, or ceramic.

Steel: Steel bearings will do perfectly if you don’t ride so often (occasionally on a sunny day). But if you use your longboard every day and in wet conditions, they will probably become tight, loud and rusty.

Stainless steel: Stainless steel bearings don’t offer better performance, they provide slightly more durability. In fact, stainless steel isn’t supposed to rust in wet conditions.

Ceramic: Ceramic bearings offer much more quality regarding performance and durability. The advantage of ceramic is that it’s unscratchable. Since bearings are in constant friction, ceramic will make your bearings last much longer if you treat them right! This quality comes with a price though; ceramic is much more expensive than steel.

Maintenance

If you want clean your bearings from all the dust and dirt, here is how we recommend to do it:

  1. Remove the bearings from the wheels and the shield from your bearings.
  2. Drop the bearings in the bearing bath (washing product) and dry them out
  3. Spread bearing oil or bearing cream on the bearings.
  4. Replace the shield back on the bearings.
  5. Replace the bearings back on the wheels

If you’re looking for more information on bearings, check this video (video from Rat Vision Skateboard Tech):

The best longboard bearings


1 – Bones Reds Bearings


Bones Bearings is one of the most legit Bearing brands out there; it was created in the 80’s by George Powel. Since then, Bones Bearings have revolutionized the industry of bearings.

The company is specialized in bearings, which is a reliable quality indicator. Bones Bearings manufacture different models of bearings, the Bones Super Swiss 6 are their midrange bearings.

Another aspect that makes Bones Bearings legit is that it sponsors athletes for bearings.

The Bones Reds are the level entry bearings from Bones Bearings, don’t consider them bad quality though. They probably offer the best mix of performance, durability, and price. Manufactured in China in a facility that is specialized in the manufacturing of high-quality bearings.

The Bones Reds come with a non-contact rubber shield preventing the bearing from getting dust and dirt. Also, the Nylon cage offers greater resistance and speed.

The bearings are pre-lubricated with Speed Cream and come with a lifetime warranty on manufacturing defects.

Pros:

  • Legit bearing brand
  • Quality/Price ratio
  • Rubber shields

Cons:

  • Bones’ entry level bearings (is it a con?)

CHECK PRICES ON AMAZON


2 – Bones Super Reds Bearings


Another set of bearings from Bones Bearings, since they’re one of the best brands out there, we figured they deserved 3 places (yes there’s another one coming) in our selection of the best longboard bearings.

As mentioned previously, Bones Bearings are used by many riders and the Super Reds are no exception. In fact, Bones designed these bearings to be the best bearings on the market at this price range. Riders know it, this is why Super Reds are among the most bought bearings. You don’t have to take my word for it, read customers review or ask riders around you.

The Super Reds are made with a higher quality steel and grade balls than the ordinary Reds, but not only. The exterior is entirely polished too, giving the bearings a better finishing. The overall results are a fast and resistant bearing. They aren’t as good as the Super Swiss 6, but they’re also much more affordable.

These bones come with the standard no-contact rubber shield to prevent dust and dirt from getting in the bearings. They are pre-lubricated with Speed Cream and come with a lifetime warranty on manufacturing defects.

Pros:

  • Legit bearing brand
  • Higher quality steel
  • Polish finish
  • Rubber shields

Cons:

  • cardboard box

CHECK PRICES ON AMAZON


3 – Bones Super Swiss 6 Bearings 


The third and last bearings from Bones are the Bones Super Swiss 6. We selected these bearings because they come from Bones and because of their 6 ball technology.

The particularity of these bearings is that they are designed with 6 more massive balls instead of the traditional 7. The advantage of having 6 larger balls is that it makes the bearing faster and more resistant.

The Super Swiss 6 bearings come with a non-contact, removable rubber shield that prevents dust from getting inside the bearings. The Nylon cage provides higher resistance and speed.

Also, the bearings are pre-lubricated with bearing Spead Cream, and they come with a lifetime warranty against manufacturing defects.

Pros:

  • Legit bearing brand
  • Speed
  • Durability
  • 6 balls
  • Rubber shields
  • Lifetime warranty

Cons:

  • Price

CHECK PRICES ON AMAZON


4 – NEAL Blackout Ceramic Bearings


NEAL is a company that sells bearings and apparel. Despite the fact that it’s a younger company, they sell high-quality bearings, and the Blackout Ceramic bearings are the perfect example.

These bearings, as its name suggests, are made out of ceramic. As we mentioned in our buying guide, ceramic is an unscratchable material which is perfect for bearings. Not only it prevents unnecessary friction, but it’s 2 times lighter and stronger than regular steel.

As you can see from the picture above, the 8 Blackout Ceramic bearings come in an aluminum box together with 4 spacers. The spacers will increase the durability and smoothness of the bearings.

Also, they come with rubber shields and Nylon ball cage for even more durability.

These ceramic bearings are affordable and offer a smooth a durable ride; nothing will go wrong with the Blackout Bearing (if you treat them well).

Pros:

  • Ceramic
  • Durability
  • Quality/Price ratio
  • Specialized bearing brand
  • Rubber shields
  • Spacers

Cons:

  • Experience in the industry

CHECK PRICES ON AMAZON


5 – SupaFly Alpha Bearings


We selected these bearings because of they got popular extremely fast. In Fact, Supafly Skate Co. is a very young company dedicated explicitly to bearings. They outsource the manufacturing in a Chinese facility that is specialized in high-quality bearings.

With a second quality inspection on the production line, you are guaranteed to get good quality bearings.

SupaFly Alpha bearings come with a smaller outer ring to eliminate unnecessary friction and noise. Besides, the steel used to make these bearings was heat treated and polished offering better resistance and finishing.

As you can see, the yellow rubber shields prevent dust and dirt from ruining the bearings. Like all the bearings brands, SupaFly sells its bearings pre-lubricated with bearing cream.

Pros:

  • Promising bearing company (even if young)
  • Quality/Price ratio
  • Rubber shields

Cons:

  • Young company

CHECK PRICES ON AMAZON


6 – SCSK8 ABEC 9 Red Silver Bearings 


SCSK8 is a skateboard company located in the US; it produces skateboards, longboards, bearings and other equipment. Even though SCSK8 is not explicitly devoted to bearings, it still sells good quality bearings that many riders like and purchase.

These steel bearings come with rubber shields that prevent the dust and dirt from ruining your smooth rides. The ABEC 9 Red Silver come pre-lubricated with a high-quality cream approved by the industry.

Pros:

  • Quality/Price ratio
  • Rubber shields
  • High-quality lubricant

Cons:

  • Durability

CHECK PRICES ON AMAZON


7 – Yellow Jacket Premium Bearings


Yellow Jacket is a specialized bearing company located in Seattle, NWM Innovations exclusively manufacture Yellow Jacket products. Yellow Jacket focuses on selling racing quality bearings at an affordable price.

These steel bearings come with patented unique rubber shield that offers more protection against dust and dirt, increasing the durability of these Yellow Jacket Premium Bearings.

Moreover, the engraved color seal that covers the bearings is a characterizes of Yellow Jacket bearings, which also drastically increases durability.

Not only they come pre-lubricated, but if you’re not satisfied with their performance, send them back, and get entirely refunded!

To conclude, they come in an aluminum box along with 4 spacers

Pros:

  • Quality/Price ratio
  • Durability
  • Rubber shields
  • Spacers

Cons:

  • A bit loud

CHECK PRICES ON AMAZON


8 – Oldboy Premium Ceramic Bearings


Oldboy is a company dedicated explicitly to ceramic bearings which is a reliable quality indicator.

These bearings are made out of high-quality ceramic making them much lighter and resistant than standard steel bearing.

They come heavily lubricated to prevent unnecessary friction, ensure durability, and protect the Nylon ball cage. Oldboy advises skating with them for few days to disperse the lubricant. These trucks come with rubber shields for better maintenance and protection.

Moreover, the balls will never break or rust due to their durable polished glass fabric.

Pros:

  • Quality/Price ratio
  • Ceramic
  • Indestructible polished balls
  • Rubber shields
  • Durability
  • Quiet

Cons:

  • Experience in the industry

CHECK PRICES ON AMAZON


9 – Fireball Dragon Precision Bearings


Fireball is a company located in Los Angeles; Dedicated to longboards and related products, their products get designed and developed by skaters for skaters, which drastically increases quality.

You can choose between 2 set of Dragon bearings; the endure set or the race set. The endure Dragon bearings are lubricated with light oil for higher speeds, whereas the racing Dragon bearings are lubricated with heavier grease for smoother and longer rides.

Also, both sets come with double shielded bearings, one on each side of the bearings for increased protection against dust and dirt.

All these features are sold at a very affordable price, giving skaters the opportunity to ride premium quality bearings without breaking the bank.

Pros:

  • Choose between 2 sets
  • 2 rubber shields per bearing
  • Quality/Price ratio
  • Durability

Cons:

  • Need a lot of lubricants

CHECK PRICES ON AMAZON


10 – Zealous Bearings


Zealous is an American company dedicated to longboard trucks, bearings, and apparel. We selected these bearings because of the company’s passion for longboard and because of the specific features of their classic Zealous bearings.

These bearings feature integrated spacers and speed rings. This feature increases resistance and performance while preventing unnecessary friction with the hanger and bolt.

Characterized by their green rubber shields, these bearings will last longer to dust and dirt.

Zealous bearings come lubricated with custom nanoceramic grease that enters the steel’s imperfection to smooth your ride and prevent unnecessary friction.

Nothing will go wrong with these bearings; they are affordable and efficient!

Pros:

  • Integrated spacers
  • Integrated speed rings
  • Green rubber shields
  • Custom lubricant
  • Quality/Price ratio

Cons:

  • Need a lot of lubricants

CHECK PRICES ON AMAZON


I hope this comparative review gave you a good overview of the best longboard bearings. If you have any questions or comments, please leave them below or send an email at support@top10slide.com. Our support team will be more than happy to discuss with you and help you find your new longboard bearings.

Leave a Reply